SKYRC NITRO ENGINE HEATER DC (12V) SK-600066

SKYRC NITRO ENGINE HEATER DC (12V) SK-600066

The SKYRC engine heater uses technology similar to that used by Formula 1, Indy Car and NASCAR Teams! It will properly pre-heat your engine to 60-70°C in 10 minutes based on ambient temperature.

SKYRC engine heater will pre-heat all the critical parts of your nitro engine, giving you a minimal of stress and wear on the engine. It help relieve the stress on the crank, con-rod, piston and sleeve during warm-up. It also give you a very easy and smooth engine start, with no stress on your starterbox. Fuel consumption is much less, as you do not have to spend time warming up and adjusting your engine. A pre-heatet glow-plug will increase the life of your plug. It is also perfect for break-in, as it reduces the "pinch" on your new engine. You will experience that engine pre-heating is a must. Most importantly, it will quickly pay for itself by increasing engine life and performance!

Key Features:
● The MCU controls heating time and power for maximum safety.
● Safety timer: Automatically shuts off after 10 minutes.
● Integrated temperature sensor: Controls the heater's output power.
● LED status indicator.
● 12V DC power supply with low voltage cutoff.
● Non-flammable and heat-resistant casing.
● Fits all 3.0 to 4.2cc methanol engines.
● Very small and lightweight, compact, easy to carry and store.
● Designed for efficient heat transfer.
● Top access allows you to start and monitor your engine without removing the heater.

Technical specifications:
● Power supply: 12 V DC
● Heating power: 90 W
● Heating time: approximately 10 minutes
● Cut-off voltage: 9-10 V
● LED indicator: Solid red = heating, Flashing red = low voltage
● Net weight: 65 g
● Dimensions: Diameter 63 mm, Height 50 mm